Five Tips for Choosing Concrete Trowels

Although there are a lot of high-tech tools available for finishing concrete, hand tools like concrete trowels are still important. Wondering what type of concrete trowel you need? Take a look at these ideas before you shop: 1. Plan to buy more than one trowel. Unfortunately, in the world of concrete, there is no one-size-fits-all solution to troweling. Ideally, you should plan to invest in more than one trowel. You need small ones for tight corners and decorative finishes, as well as larger ones for more basic jobs.

Some Tips for Having Shipping Boxes Custom Made

Custom-made boxes may be just what your company needs to save on shipping costs and to get your name out there in front of people even while your product is in transit. Custom boxes can be as lightweight as you need to protect your items without adding costs to the shipping itself, and they can also be made with any type of stamp, logo, or other mark on the outside. If you're ready to have custom boxes created for your product, note a few tips for having them made for you.

5 Top Benefits of Using Corrugated Steel Pipes in Drainage Projects

Corrugated steel pipes are a practicable and cost-effective alternative to other materials when used in drainage systems. The pipes are used in multiple construction projects because of their low maintenance, durability, and ease of installation among other advantages. When you incorporate corrugated steel pipes in your drainage systems, you are guaranteed a longer design life that will definitely outlast its competitors. Here are some reasons you should use corrugated steel pipes in drainage projects, both commercial and residential.

The Five Supplies You Need to Make Your Own Sandblasting Cabinet

If you need to sandblast small pieces of metal on a regular basis, you may want to consider investing in a sandblasting cabinet. Alternatively, with a bit of welding and building knowledge, you can make your own sandblasting cabinet. Here's what you need: 1. Sheetmetal The main compartment of a sandblaster is a metal box. This box prevents the sand from the blaster or the debris from the metal from blowing around the room.

As the Pipe Turns: Deciding Between Elbows and Bends

If you are designing a machine with metal pipes and you need one of the pipes to change direction, you have two options. You can work with an induction pipe bender and bend your pipe, or you can use an elbow. Wondering which is best for your situation? Consider the following tips. 1. Format A bend refers to a bend made in a piece of metal. The bend can be made through hot or cold induction bending, and once it is done, you have a contiguous piece of metal piping that has a turn or angle in the middle of it.